Support

McCulloch Steam is committed to providing the highest quality consumer service. We want you to be completely satisfied with your purchase. Many questions can be answered in our Support section below, or if you have any questions or concerns about your McCulloch Steam product you may contact us via any of these resources >>

Phone & Chat Support Hours:

M-F 8:30a.m. - 5:00p.m.(CST)
800.711.6617

McCulloch Steam
415 E. 13th Street
Andover, KS 67002
ConsumerService@McCullochSteam.com

MC1350 Portable Power Steam Cleaner

Troubleshooting

(use in conjunction with Owner's Manual)

mc1230Chart

Tips and Recommendations


Proper Storage

Preparing your Portable Power Steam Cleaner for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below.

  1. Turn unit “Off” and unplug power cord.
  2. Press and hold Steam Trigger to release all remaining steam.
  3. Allow unit to completely cool (at least 30 minutes).
  4. Remove all accessories from unit.
  5. Carefully remove Water Tank Cap.
  6. Drain any remaining water from Water Reservoir into a sink or tub – this will help to minimize mineral build-up and prevent over-filling during your next use.
  7. Wrap power cord around Cord wrap. Store Portable Power Steam Cleaner in a cool, dry location.

General Tips
  1. Switch On/Off Switch to “On” position. Within 30 seconds, the Steam Ready Light will illuminate green indicating the unit is ready for use.
  2. For first time use or after a prolonged storage time, there may be a slight delay for steam due to a dry Water Treatment Cartridge.
  3. Keep Steam Trigger pressed for a continuous flow of steam. You may also hold the Steam Trigger, then push the Steam Trigger Lock to lock it down. This will allow a continuous flow of steam without need of holding the Steam Trigger down manually.
  4. Steam output can be adjusted by simply turning the Steam Adjustment Knob.
Mineral Build-Up

A common maintenance need for steam appliances is the removal of build-up caused by high mineral content in many municipal water supplies. This mineral build-up may limit the effectiveness and reduce the life of your Portable Power Steam Cleaner.

The best way to minimize mineral build-up is to use distilled or de-mineralized water when using your Portable Power Steam Cleaner. If you are unable to use distilled water, it is recommended that the following procedure be followed monthly to remove any mineral build-up:

  1. Turn unit “Off” and unplug power cord.
  2. Remove all accessories from unit.
  3. Carefully remove Water Tank Cap.
  4. Drain water from Water Reservoir into a sink or tub.
  5. Slowly pour 8 oz of vinegar into Water Reservoir.
  6. Replace Water Tank Cap, ensuring that it is screwed on tight.
  7. Plug unit in, turn On and run unit until vinegar has been steamed out of the system.
  8. Rinse Water Reservoir with fresh water, drain and repeat until vinegar odor dissipates.